Connecting the PICkit2 to the 12F508 boards

From Fox.Build Wiki
Revision as of 23:44, 30 March 2017 by Doug (talk | contribs) (typo)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The 12F508 boards can be connected to the PICkit2 with a 5-wire connection cable. The following photos show how the cable should be connected at both ends.

NOTE: It is important to connect the cable correctly! Connecting it incorrectly could damage the PICkit2 or the 12F508 board!